ENCAT-Pedestrian-Fencing-Metal-and-Civil-product-manufacturing-company in Australia-logo

ENCAT Type 2 RMS Pedestrian Fencing

ENCAT Type 2 Pedestrian Fencing

Australian supplier of Type 2 RMS Pedestrian Fencing

ENCAT RMS specification compliant products for sale in Australia


ENCAT Australian made pedestrian fencing and civil products available direct from the factory


ENCAT Pedestrian fencing and civil products for sale


ENCAT Modular pedestrian fencing panels


ENCAT is an Australian manufacturer of Type 2 RMS Pedestrian Fencing. We can supply pedestrian fencing to councils, shopping centres, schools or fencing contractors from our stock held in Australia.

The Type 2 Pedestrian Fence is designed with aesthetics in mind, four 22mm round balusters are located on the top of every panel providing a different look to the flat top type 1 pedestrian fence.

Originally designed by the Roads and Maritime Services, pedestrian fencing is designed to prevent pedestrians walking onto or crossing a road at a mid point. It can change the walking patterns of pedestrians along roads or busy footpaths. There are six different styles of pedestrian fence each with the same key benefit of separating pedestrians from vehicular traffic. The main difference is in the aesthetics of each type. 

As soon as new pedestrian fencing is installed, it changes walking patterns immediately, the physical barrier forces different movement patterns in the area. The other benefit of using pedestrian fencing is in the case of a vehicular accident it can help arrest some of the energy from the moving vehicle by deforming on impact.

  • Made to Australian standards
  • Complies with Council & RMS standards.
  • Welded by Qualified welders.
  • Made in Wollongong with delivery available Australia Wide
  • Hot dipped galvanised
  • Modular panels are easily replaced if damaged
  • Powder coated in any colour required
  • In-ground or base-plate mounting
  • Custom designs available
  • Colour variations available

Type 2 Pedestrian Fences made in Australia

ENCAT is an Australian manufacturer of pedestrian fencing which is produced locally to be 100% Compliant with RMS drawings, specifications and Australian Standards.

  • 100% Australian Made.
  • 100% Australian Steel AS3678 & AS3679 (not imported)
  • Certified Welding to AS1554
  • Hot Dip Galvanising to AS1214 
  • Can be powder coated in any colour

Fencing Panel Post Intermediate Baseplates specifications

  • Material:  Hot Dip Galvanised Steel


  • Colour:    Powder coated any colour  or  hot dip galvanised finish


  • Weight:   28kg


  • Height:   1366mm


  • Supplied: Comes with 2 x M10x50mm galvanised bolts, nuts, washers.


Additional information about ENCAT's Type 2 RMS Pedestrian Fencing

Fencing supplier
ENCAT is Australia’s largest manufacturer and supplier for all types of Pedestrian Fences and we make the fencing in our factory in NSW. We actively supply commercial fencing contractors, civil works contractors, councils or government department tenders that need a safety fence installed on for roads. ENCAT can design and manufacture Type 1, Type 2, Type 3, Type 4, Type 5 and Type 6 fence types. These products are commonly referred to as an RMS Pedestrian Fence or Pedestrian Safety Fence Panel. We only manufacture fence panels that are as specified by the NSW RMS or Roads Waterways Transport for NSW

The purpose of a pedestrian fence
The function of this type of fence construction is to help create safer movement patterns of roadside users. They are a physical barrier that we make using 100% recycled Australian steel that are used to direct pedestrians to safe crossing areas. It stops people from accessing areas of the road corridor where they may interact with vehicular traffic in an uncontrolled manner. 

Typical pedestrian fencing installations
The most common use of pedestrian fencing is around shopping centres where people will try and cross the road to get to their car parking or roadside stores. It is not a road safety barrier and cannot be used in lieu of a road safety barrier. It is not designed to deflect or arrest an errant vehicle or to prevent injury to pedestrians by errant vehicles although it should deform on impact. If the fence panels have been designed and manufactured correctly they should collapse as a whole panel when impacted that minimises the detachment of individual elements, and features a staggered layout of the balusters allowing motorists and pedestrians approaching on opposite sides of the fence to see each other. 

What are the variations of fencing?
Prior to 2011 this type of fence was known as RTA pedestrian fence and Type1 pedestrian fence, the naming has changed over time and includes these variations;

  • RMS type one pedestrian fencing
  • RTA type one pedestrian fencing
  • Pedestrian safety barrier type 1
  • RTA pedestrian fencing type 1
  • RMS pedestrian fencing type 1
  • RTA pedestrian fence type 1
  • RMS pedestrian fence type 1
  • Pedestrian fencing type 1
  • Pedestrian fence type 1
  • Road fencing type 1
  • Road fence type 1
  • RTA fencing
  • RMS fencing
To find out how much pedestrian fencing costs just contact our team or send us a quote request.

See ENCAT's range of pedestrian fencing products for sale in Australia

ENCAT Type 1 Pedestrian Fencing
ENCAT Type 2 Pedestrian Fencing
ENCAT Type 3 Pedestrian Fencing
ENCAT Type 4 Pedestrian Fencing
ENCAT Type 5 Pedestrian Fencing
ENCAT Type 6 Pedestrian Fencing

See some of the civil projects ENCAT has helped to complete in Australia

Picture of John Ford
John Ford

Founder & Director of ENCAT Australia

You know, back in 1989, a new metal fabricator in NSW emerged – ENCAT. We craft a range of products that are focussed on safety. Specialising in Pedestrian Fencing, ENCAT ensures our roads aren’t just strips of tarmac, but lifelines where every step you take and every drive you make is cushioned with care. 

When you think roads, think safety. When you think safety, think ENCAT. Your life’s worth it.