Australian supplier of Type 1 Pedestrian Fence Panels With Gate
COMPLIES WITH RMS SPECIFICATIONS
FACTORY DIRECT, 100% AUSTRALIAN STEEL & AUSTRALIAN MADE
AVAILABLE FOR FAST DELIVERY AUSTRALIA WIDE
MODULAR STEEL PANELS EASILY REPLACED IF DAMAGED
ENCAT is an Australian commercial fencing manufacturer of Type 1 Pedestrian Fence panels that can be custom made to include a single or dual panel gate incorporated into the fencing run. We can supply steel pedestrian fencing to councils, shopping centres, schools or fencing contractors from our stock held in Australia that can be custom made to suit the existing conditions of the site you are installing on.
See an example of an installation at a site in Wollongong
Originally designed by the Roads and Maritime Services, steel pedestrian fencing is designed to prevent pedestrians from walking onto or crossing a road at a midpoint. It can change the walking patterns of pedestrians along roads or busy footpaths. While there are six styles to choose from, the Type 1 Pedestrian Fence is the most popular and perfectly suits the inclusion of a gate if required.
As soon as new Type 1 Pedestrian Fencing is installed, it changes walking patterns immediately, with the addition of our gate panel you can also create other access options at the site.
- Made to length
- Type 1 steel RMS fencing made to Australian standards
- Complies with Council & RMS standards.
- Welded by Qualified welders.
- Made in Wollongong with delivery available Australia Wide
- Hot dipped galvanized
- Modular panels are easily replaced if damaged
- Powder coated in any colour required
- In-ground or base-plate mounting
- Custom designs available
- Colour variations available
Type 1 Steel Pedestrian Fences made in Australia
- 100% Australian Made.
- 100% Australian Steel AS3678 & AS3679 (not imported)
- Certified Welding to AS1554
- Hot Dip Galvanising to AS1214
- Can be powder coated in any colour
Fencing Panel Post Intermediate Baseplates specifications
- Material: Hot Dip Galvanised Steel
- Colour: Powder coated any colour or hot dip galvanised finish
- Weight: 28kg
- Height: 1366mm
- Supplied: Comes with 2 x M10x50mm galvanised bolts, nuts, washers.
Additional information about ENCAT's Type 1 Pedestrian Fence With Gate
ENCAT is Australia’s largest manufacturer and supplier for all types of Pedestrian Fences and we make the fencing in our factory in NSW. We actively supply commercial fencing contractors, civil works contractors, councils or government department tenders that need a safety fence installed on for roads. ENCAT can design and manufacture Type 1, Type 2, Type 3, Type 4, Type 5 and Type 6 fence types. These products are commonly referred to as an RMS Pedestrian Fence or Pedestrian Safety Fence Panel. We only manufacture fence panels that are as specified by the NSW RMS or Roads Waterways Transport for NSW.
The purpose of a pedestrian fence
The function of this type of fence construction is to help create safer movement patterns of roadside users. They are a physical barrier that we make using 100% recycled Australian steel that are used to direct pedestrians to safe crossing areas. It stops people from accessing areas of the road corridor where they may interact with vehicular traffic in an uncontrolled manner.
Typical pedestrian fencing installations
The most common use of pedestrian fencing is around shopping centres where people will try and cross the road to get to their car parking or roadside stores. It is not a road safety barrier and cannot be used in lieu of a road safety barrier. It is not designed to deflect or arrest an errant vehicle or to prevent injury to pedestrians by errant vehicles although it should deform on impact. If the fence panels have been designed and manufactured correctly they should collapse as a whole panel when impacted that minimises the detachment of individual elements, and features a staggered layout of the balusters allowing motorists and pedestrians approaching on opposite sides of the fence to see each other.
What are the variations of fencing?
Prior to 2011 this type of fence was known as RTA pedestrian fence and Type1 pedestrian fence, the naming has changed over time and includes these variations;
- RMS type one pedestrian fencing
- RTA type one pedestrian fencing
- Pedestrian safety barrier type 1
- RTA pedestrian fencing type 1
- RMS pedestrian fencing type 1
- RTA pedestrian fence type 1
- RMS pedestrian fence type 1
- Pedestrian fencing type 1
- Pedestrian fence type 1
- Road fencing type 1
- Road fence type 1
- RTA fencing
- RMS fencing
See the pedestrian fence installations ENCAT has helped to complete in Australia
We installed Pedestrian Fencing on the busy Pittwater road to help protect students at Narrabeen Sports High School in NSW. See the work we completed
ENCAT manufactured pedestrian fencing for this road median in Grafton which required a curved shape to help people cross the main road
ENCAT manufactures and supplies Pedestrian Fencing that can be used on median strips in commercial zone areas and main roads
We supplied Type 5 Pedestrian Fencing to a local Western Australian civil earth moving company who were constructing a car parking area for a local school in Broome
We installed pedestrian fencing on this bridge over the A6 highway to help the flow of people around the busy intersection & local school kids to walk home safely.
This council used pedestrian fencing on the verge to help protect people visiting this community pool near the crossing and car park